Hacker Newsnew | past | comments | ask | show | jobs | submit | Dan_-'s commentslogin

So what do you call the tubing around the wire bundle? That’s what we call “loom”.


In Canada we generally call it the sleeve, or the wrap.


I'd understand either of those, but I'd go with "tubing"

https://www.3m.com/3M/en_US/p/c/electrical/wire-cable/tubing...



For performance vehicles I used adhesive-lined heat shrink tubing for basically everything.

[1] Braided tubing and [2] conduit, respectively.


I did this but using Twilio, a Grandstream HT802v2, and a basic AT&T wall phone. Caller ID sorta works. I really tried to find a phone that would make a satisfying sound when slammed down, but I found that no one makes good, solid corded wallphones any longer.

The toughest part was figuring out which set of wires (my house had like 5 lines somehow) went to that particular jack in the kitchen.


When I was a kid I remember discovering the heft of the home phone came from a big chunk of metal screwed into the plastic case.

(My family moved to cell phones so I got the opportunity to disassemble the old phone.)

Maybe just find some washers and glue them inside your handset and receiver?


And it’s like they included “use all the hallmark annoying tells of LLM responses in your comment” in their prompts.


Visiting Quebec from the East Coast is great. Driving distance, plus Montreal and Quebec City are both different enough to feel like you’ve gone somewhere different. Plus the people are just really nice.


I love the food in Montreal, but not the roads!

If you mean North East US, that whole area is a different thing. You guys (US NE + Eastern Canada) are practically neighbors compared to Miami, Houston, or Los Angeles folks :) Also probably more used to the cold!


Should is doing a lot of work there. The reality is most don’t. These are people who don’t understand minimum conductor size trying to DIY a solar system.


I would assume they hire competent engineers, so it’s probably something intentional, like an invasion of privacy/user telemetry. At least it doesn’t have AWS’s UX.


> like an invasion of privacy/user telemetry

Could be. Interesting anecdote on that, we're using the Vodafone TV app on the very same TV, and that app you can toggle "send analytics to Vodafone" on or off in the settings, which of course defaults to on.

At one point I toggled it to off, and suddenly the whole app became as fast as all the others, while when the toggle is on, the application is as slow and laggy as the Amazon one. So that might actually very well be the reason.


> LLM's are notoriously bad at this. The noise to signal ratio is unacceptably high…

I keep seeing this statement in threads about AI, and maybe it’s just from you, but high SNR is a good thing.

See https://en.wikipedia.org/wiki/Signal-to-noise_ratio

I think the rest of your post is very valid. It’s the mental equivalent of this article https://news.ycombinator.com/item?id=47049088


Except they didn't say signal-to-noise, they said noise-to-signal. And if the NSR is unacceptably high, that means the SNR is unacceptably low.

Two inverses do make a right, it seems.


Hah, you got me there! I'll try to keep the ratio flipped correctly next time ;)

I read that article recently, so the similarities might not be entirely coincidental. 'JPEG of thought' is gonna stay in my vocabulary for a while.


Hehe, yeah there's some terms that just are linguistically unintuitive.

"Skill floor" is another one. People generally interpret that one as "must be at least this tall to ride", but it actually means "amount of effort that translates to result". Something that has a high skill floor (if you write "high floor of skill" it makes more sense) means that with very little input you can gain a lot of result. Whereas a low skill floor means something behaves more linearly, where very little input only gains very little result.

Even though its just the antonym, "skill ceiling" is much more intuitive in that regard.


Are you sure about skill floor? I've only ever heard it used to describe the skill required to get into something, and skill ceiling describes the highest level of mastery. I've never heard your interpretation, and it doesn't make sense to me.


Yes, I am very sure. And it isn't that difficult to understand, it is skill input graphed against effectiveness output. A higher floor just means that with 1 skill, you are guaranteed at least X (say, 20) effectiveness output.

https://imgur.com/tOHltkx

The confusion comes from people using "skill floor" for "learning curve" instead of "effectiveness".

But this is a thing where definitions have shifted over time. Like jealousy. People use "jealousy" when they really mean "envy", but correcting someone on it will usually just get you scorn and ridicule, because like I mentioned, language is fluid.


If the skill floor is high and therefore "effectiveness" is the same for a wide range of skill levels, isn't that the same as having a high barrier to entry? It seems that any activity or game where it takes a lot of skill before you can differentiate yourself from other players would be described that way.


No, a high skill floor is the opposite. It means that anyone can pick up the thing and immediately do decently.

To put it simply, think assault rifle vs sniper rifle. Anyone can use the AR and spray and pray and do pretty okay. You can't do that with the sniper rifle. So the AR has a high skill floor (minimum effectiveness) whereas the sniper rifle has a low skill floor (low minimum effectiveness). But the AR has a low skill ceiling too a point where you can put in endless amounts of skill and see no improvement in effectiveness. The sniper being an infinite range OHKO can scale to the end given aim skill and map knowledge.

Another example would be Reinhardt in Overwatch. You can tell a noob to "look in that direction and deploy shield" and they will contribute to the team. You can't put a noob on Widowmaker and have them contribute (as) significantly.


I've also never heard that use of "skill floor" before. The "floor/ceiling" descriptors imply min/max constraints.


The control freak (commercial one) is worth every penny.


Many of those people have moved to Bluesky. Which has its own issues.


The immunologist’s office weighs these tiny amounts and sends you home with a few weeks’ supply. As you progress and the margin of error becomes less dangerous, you get to weigh it yourself.


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: